Coast Guard Lifeboat

RedRider Openingspost 12 jaren geleden

Just started this build. This is my first built and know I will make mistakes. However, it's a start.....

Coast Guard Lifeboat build continuem

Started this build in January, spent a couple months "planking", them came the sanding and filling. Getting close to the sealing the hull inner and outer.

Geliked door sandkb and Pav403

3 opmerkings

Pav403
Petty Officer 1st Class12 jaren geleden
Best of luck with that, l'm on my 1st build and finding my mind wanders from one thing to another with regard to how am I going to do this or that.

As for the hull and finishing, I'm keeping it simple, a few coats of wood primer sanded smooth (light rub with 180 grade the finishing paper) then a few coats of paint. The boat will be out of the water longer than its in it, so should be ok?? I coated the interior with a few coats of yacht varnish too. I may try a water based resin on my next project and see how that goes.

Good luck with your build,

Dave
Vind ik leuk
RedRider
Petty Officer 1st Class12 jaren geleden
HI Dave,
I welcome you to my blog. I'm learning by the seat of my pants. So, fell free to offer any tips and tricks along the way.
To date, I've given the interior a first coat of polyurethane. Am now researching the best way to finish the hull. in the meantime, I've been filling and sanding.
After this, I'll begin the initial stage of finishing the hull. Next, will be installing the running gear....stay tuned!
Vind ik leuk1
Geliked door Pav403

Inloggen to comment on this update.

MODEL BOATS WEBSITE

Coast Guard Lifeboat

Volgers (1)

Coast Guard Lifeboat

Coast Guard Lifeboat build continuem