MODEL BOATS WEBSITE
0 0
Volgen

Bunker boat near completion

Gestart door cdnfurball
8 replies 17 vind ik leuks Laatste activiteit: 4 jaren geleden
#9

Bunker boat near completion

Thanks brightwork…
There she sits, with all her gear in it. Ron, all her gear and ballast sit low in hopes of preventing a “ bobbing boat “ scenario. I spent a good year or so following you guys looking for tips and suggestions. I came up with a note book full of them. The only things to add are some trinkets.
Don’t get stressed, CAUSE IT !
Geliked door Brightwork and Len1 and
#8

Bunker boat near completion

Well done..she looks great. And thanks for the chuckle I enjoyed reading your post. Great sense of humour.
Geliked door Len1
#7

Bunker boat near completion

On the small water test in the pool, did it set verily well, steady, not rocking of bobbing like a cork? If so, good, if it bobbed and rocks, then in my opinion the model needs a bit more ballast. Possibly when you add the batteries it will steady it.
Geliked door Len1 and dave976
#5

Bunker boat near completion

Thanks Gentlemen,
nothing like a glass of your favorite whiskey, some good Pink Floyd and being tested on a project that could turn into fire starter in a heart beat. 😁
Don’t get stressed, CAUSE IT !
Geliked door pressonreguardless and peterd
#4

Bunker boat near completion

I started off with few pounds of stainless ball bearings... all I had, but not enough. I purchased a few bottles of copper BB's and just started spreading them out and then 2 part epoxied them in place. Once that cured, painted inside the hull Matt black. If I saw a shiny Spot, I had water where I didn't want it.
Don’t get stressed, CAUSE IT !
Geliked door Ronald
#3

Bunker boat near completion

Impressive build for first time. May your boat get plenty of work.👍
#2

Bunker boat near completion

What ballast is inside the hull?

Some of us use BB shot; HO train car weights; lead shot; recycled materials from skeet shooting ranges. You glue shot in place, or put in small plastic bags and secure when ballast is done.
#1

Bunker boat near completion

Good day,
My first build that’s coming near completion. The kiddie pool was used to balance it port to starboard as well as stern to the pointy end. It’s 36” o.a.l. and weighs more than a case of beer. I do have lights in the upper and lower deckhouses as well as the deck house over the “ engine room “ and the spot light too.
I’m eager the get around to the sea trials as I have never done an RC or scratch built boat before. I know she floats and I want to see it go and hopefully come back too !
A 2 year project of working on it when time allowed and family life didn’t get in the way….
Don’t get stressed, CAUSE IT !
Geliked door Len1 and Graham93 and

Inloggen om aan deze draad toe te voegen.

Advertentie — Verwijder advertenties met een lidmaatschap

Gesponsord

Met meer dan tien jaar kennis van duizenden leden is deze website de toonaangevende bron voor liefhebbers wereldwijd. Als elke bezoeker één pond of dollar zou doneren, zouden de jaarlasten van de website binnen enkele minuten gedekt zijn.

Als u doneert of abonneert wordt u ere-lid, ontvangt u een medaille en krijgt volledige toegang tot de website zonder advertenties of beperkingen!

U helpt mee aan:

  • Domeinkosten
  • Beveiligingscertificaten
  • iOS- & Android-appkosten
  • Website bandbreedte
  • Serverback-ups
  • Onderhoud & Reparatie
  • Administratiekosten

Zonder uw steun zou de website niet zijn wat hij nu is. Overweeg een donatie voor deze kosten of schakel uw adblocker uit om ons te helpen drijven.

Steun deze website Doe een donatie

Delete this post?

Het wordt van de site verwijderd.

Dit concept weggooien?

Je concept wordt verwijderd en kan niet worden hersteld.

U heeft een onafgemaakte concept

Wat wil je ermee doen?