Lock Nuts on Props

Gestart door Dumaspittman 4 jaren geleden

4 replies 7 vind ik leuks Laatste activiteit: 4 jaren geleden

#5 4 jaren geleden

Lock Nuts on Props

If you use a thread locking compound, I would use Locktite low strength pink, or Vibra-tite thread locker.

LEN1

Geliked door Dumaspittman

#4 4 jaren geleden

Lock Nuts on Props

I thought so! It always pays to check.
Thanks.

#3 4 jaren geleden

Lock Nuts on Props

Loctite is good insurance,
Blue loctite would be best.
Trev

Geliked door Rowen and Dumaspittman and

#2 4 jaren geleden

Lock Nuts on Props

Lock nuts should be OK but loctite would be belt and braces. It is possible to release loctite with a small amount of heat, so its not permanent.

Geliked door Colin H and pressonreguardless

#1 4 jaren geleden

Lock Nuts on Props

I have a question that I could use some advise on. If I use lock nuts on props, do I need to also use Locktite? The screws are part of a rather high powered system with 800 motors driving 1.5 inch props with dogs.
Thanks!

Geliked door pressonreguardless

Inloggen om aan deze draad toe te voegen.

MODEL BOATS WEBSITE

Lock Nuts on Props

Volgers (3)

Lock Nuts on Props

Lock Nuts on Props

Lock Nuts on Props

Lock Nuts on Props

Lock Nuts on Props