Modified Vivacity with Home built engine

Gevermeld door GeorgeH · 4 jaren geleden

Specificaties

Boote lengte: 39" (99.06 cm)
Motortype: Nitro
Aandrijftype: Direct
Schroeven: Single

Foto's

Over deze boot

Working on scratch-built Vic Smeed design Vivacity from plans
All wood planks cut from white cedar on the table saw.

Need to find a neater way of cutting out the windows. On the sides.
I used a drill on the corners then went in with a Dremel tool cutting wheel. Still working on cleaning up the edges with a sanding stick.

Any suggestions on the best was to get accurate window outlines?

Vind ik leuk 3 vind ik leuks

Geliked door Madwelshman and Colin H and

Reacties

GaryLC Silver
Commodore4 jaren geleden
All a question of the right saw blade in a clamping type handle, if stuck there is always the option of making something to suit, as per grinding down a hack-saw blade tapered to a point, and a couple of inches long, will suffice rather nicely. Of course, there is always the internet option of finding the right tool for the job at hand. Regards, Gary.
Vind ik leuk4
Geliked door Dumaspittman and stevedownunder and
Aerostar55
Master Seaman4 jaren geleden
Thanks for the tip. I have an old scroll saw. Unfortunately, the proper blades for it are rather scarce!
Vind ik leuk2
Geliked door Dumaspittman and stevedownunder
ChrisF Bronze
Admiraal4 jaren geleden
I use a scroll saw but failing that you could use a coping saw and then sand to the lines. Using a cutting wheel is a bit awkward, especially with small windows and curves.
Vind ik leuk3
Geliked door stevedownunder and Peejay and

MODEL BOATS WEBSITE

Modified Vivacity with Home built engine

Specificaties

Foto's

Over deze boot

Reacties