Reacties

Inloggen om te reageren.

1. GrahamP74🇬🇧

   Onderluitenant·6 jaren geleden

   There’s a few pics, hard to see because it’s a small area to work in!

   Geliked door Martin555
2. Ianh🇿🇦

   Commandant·6 jaren geleden

   Keep dirty and clan wiring as far as possible away from each other

   Geliked door Martin555
3. RNinMunich🇩🇪Bronze

   Vlootadmiraal·6 jaren geleden

   " I get the battery ok for the motors but then the steering does some crazy stuff. Need to investigate! "
   Brushed motors with no spark suppression capacitors?
   Battery voltage too high or to low for the RX? Is the RX supply from a BEC in the ESC or separate battery/BEC?
   Antenna and/or rudder servo cable too close to motor-ESC wiring?
   Antenna too low in the hull and/or lying horizontal?
   Bench testing with the TX too close to the boat?
   Just a few pissiboloties Graham.
   Any chance of a shufti inside the boat?
   Happy trouble shooting 🤞
   Cheers, Doug 😎 Greetings from a fellow Man of Kent👍

   Geliked door Martin555 and Ianh Bekijk alles
4. GrahamP74🇬🇧

   Onderluitenant·6 jaren geleden

   Getting the right battery voltage, seems I get the battery ok for the motors but then the steering does some crazy stuff. Need to investigate!

   Geliked door Martin555
5. Martin555🇬🇧

   Vlootadmiraal·6 jaren geleden

   What problems have you been having Graham?
   
   Martin555.
6. GrahamP74🇬🇧

   Onderluitenant·6 jaren geleden

   I have installed motors and ex unit but had a lot of trouble getting it to work properly so have put her to the side for now! Quite hard because it’s small and there’s a lot of bits inside. She does sit well
   In the water though

   Geliked door Seanympth and Ianh and 1 other
7. Martin555🇬🇧

   Vlootadmiraal·6 jaren geleden

   Another nice boat Graham.
   I would love to see her on the water.
   
   Martin555.